YT101 ACRYLIC SEALANT

This is a strong. Flexible filler suitable for both interior and exterior usage. It provides a durable adhesive for aluminium, brick, ceramic tiles, concrete, glass, plasterboard, wood and painted surfaces. Having a finished surface that if fully paintable.

• APPLICATION STANDARD

Apprarance: Thixotropic Paste

Tensile Modulus (Mpa): 0.08

Solid Content (%): 78-80

Hardness (HsA): >25

Density (g/cm³): 1.35

RECOMMENDATIONS

Recommended temperature range at time of Application is 5°C - 40°C. Use masking tape on each side of joints to protect surfaces and ensure a neat job.

DIRECTION

• 1. Ensure all surfaces are clean, dry, free from dust and grease.
• 2. Cut cartridge seal. Cut nozzle at 45°C  andgle to desired bead thickness, screw nozzle into cartridge & place cartridge into caulking gun.
• 3. Apply sealant in a continuous steady flow while pushing head of nozzle.
• 4. Smooth off any excess filling with wet putty knife or damp cloth.
• 5. Remove masking tape before skin dries and protect area from water for up to 4 hours after application.
• 6. Filler becomes touch dry in approximately 30 mins under normal weather conditions and has a paintable surfaces after 2 hours of application.

• CLEAN UP

Remove any excess sealant immediately with damp cloth.

• STORAGE

Do not store below 0°C 

• FIRST AID

If skin contact occurs, remove contact clothing and wash skin thoroughly for minimum of 15 minutes. If poisoning occurs contact a doctor or poisons into centre.