5 Ton X 1250 Hydraulic Un-coiler

Hydraulic system expand coil inner hole, Pump motor: 3KW

Frequency Inverter to regulate turning speed, Motor: 3KW

Link-connect expanding system

Load capacity = Max.5Tons

Coil Inner-diameter= 508+30mm, Coil width = Max.1250mm

Automatic stopping device with limited switch as assistance to control stop/star rotation

Entry roller & Manual Pre-shearing device           Un-powered              

Smart cut control, to cut off the end of the final piece of sheet only

Working thickness up to 0.8mm

Polythene Film-on Device

Un-powered film-on device to cover plastic film on the surface of sheet

Cold Rolling Mills

Feeding Section with guide;

Gear/Sprocket driving; 18-steps to form; 

New-stand-frame-design

Rollers manufactured from 45#, CNC lathes, hard Chrome Coated

Shafts Diameter=ф75mm, Precision Machined

Main motor =7.5 KW, Frequency speed control

Forming speed: Approx. 4m/min (on the base of stair length 350mm / production length 6m)

Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside, slip type

Hydraulic Stair-Drawing & Cutting M/C

Stop to press, Stop to cut; Post cut, No Blanking cut

Cutting tool material: Cr12Mov, Heat treatment

Stair depth=18/23mm

Pump motor =11 KW     

The following pictures are for your reference only 

PLC Control System

Control the quantity, drawing length (250-350mm) & cutting length (min.800mm) automatically.

Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc

CLOSED LOOP CONTROL SYSTEM

Cut-to-length tolerance≤±2 mm 

Control voltage 24V

Product Rack    Un-powered, 3 units