Product Characteristics:
1.Built-in 1pc 4V 2000mAH lead-acid battery, rechargeable and free maintenance;
2.Light source use environmental and super brightness white SMD LED with long life span. Low power consumption, 28PCS SMD only consume 5W and can work over 3h;
3. You can adjust the LED brightness freely through the rotary switch, easy to operate, can make better use of lighting energy according to environmental requirements ;
4. Equipped with poly-crystalline silicon solar panel, it has energy saving, environmental and high conversion efficiency features;
5. Attached with DC input port, it can connect adapter or solar panel to charge.
6. Convenient to carry. The product is a lighting lamp specially designed for workers who work at night and dark environment.
Product Instructions:
- 1. When use AC charging, push the switch to “OFF” , insert the one end of eight-character round AC power cord into the product AC charging socket, insert another end into the AC110 ~ 240V/50 ~ 60Hz power socket, the red light is on when charging, it turns green when full charged, it takes about 10h for full charge;
- 2. When charging by solar energy, the solar panel should face the sunshine, the red light is on when charging, it turns green when full charged.
- 3. When charging by adaptor,the output parameters is: voltage: 9.0V,current:0.3A, the red light is on when charging, it turns green when full charged
- 4. The LED lamp won’t work no matter it is on or off while it is charging, it has emergency function at present, it will light automatically when power off .
- 5. When using LED lighting, turn on the rotary switch, the LED lights up; Rotate clockwise, the brightness will gradually increase to strong light; rotate counterclockwise, brightness weakens to weak light; When the rotary switch is on the “OFF” position, the light is off;
Cautions
1.Please use it in strict accordance with the instructions.
2.Please don’t replace any components and transform the lamp by yourself.
3.If the external flexible cable or cord of this lamp is damaged, it should be replaced by the manufacturer or service agent;The light source of this lamp can’t be replaced, if the light source use up, please replace the total lamp;
Cautions:
- 1. To ensure the life of battery, please charge 3h before first use. In the process of use, stop using and charging it promptly when the ray of the light is becoming dim obviously;
- 2.When using, do not shine eyes directly in case of affecting eyesight (Child should be guided under adults);
- 3.When use AC charging, don't use DC charge at the same time(AC and DC can't be used at the same time)
- 4.When the product is charging, the push button switch should be placed in the "OFF" position, and the charging time should not exceed 20 hours;
- 5.After full charged, the light turns green, pls stop charging in case of damaging the battery due to too long charging time
- 6.When the product is not in use, please put the push button switch in the "OFF" position; if it is not used for a long time, please recharge the product once every two months;
- 7.The Product containing batteries,at the end of the battery life, please store in the appropriate place to avoid environmental pollution, scrap according to local laws and regulations.
- 8.Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations.
- 9.This product belongs to category II products.