Product Name: Speaker Table Lamp Product Model: KM-6722
Product characteristics:
- 1. Built in rechargeable, environmental-protecting and free maintenance Li-on battery with capacity up to 3.7V 3000 mAH;
- 2. Attached with Micro-USB socket, as the product charging input port, it can directly charged by cellphone adapter or the adapter with USB output port;
- 3. The light source adopts green and high-brightness SMD LED,low power consumption,When the maximum brightness of 27 LED is reached, the power consumption is only 3W. When the built-in battery is fully charged, the lighting time is up to 4 hours. When the external power supply is used, it can be used for a long time.
- 4. Built in control circuit using MCU touch, simple and convenient operation, to better use the energy according to the environmental requirements;
- 5. Built-in SD/USB intelligent decode, it can directly play audio files of SD card and U disk. When you play the audio files, just insert the SD card or U disk into the product, then you can enjoy the moving melodies. The decode support MP3 radio format,digital audio power amplifier chip,perfect sound;
- 6. Self-equipped with Bluetooth function, after successful matching, it can transmit sound and play on the product;
- 7. Attached with AUX socket, as the audio cable is connected, it can be used for external audio playback;
- 8. The product is integrated of SD USB Speaker, table lamp and extra speaker together, which improve product utility;
- 9. It is fit for office workers, put beside desk and computer,you can enjoy beautiful music after work. Besides, the product can be taken as emergency lamp for suddenly power off .
- Product Instructions:
- 1. To charge this product, please turn the switch to "OFF" position to turn off the LED lighting first, then connect one end of the USB cable with the micro-USB plug to the product and the other end to a nominal DC 5V power adapter with a USB output port (DC 5V / 1.5A is recommended). The corresponding charging indicator is red, when full of charge, it will turn to green. It will take 6 hours for a full charge. When turn the switch to "ON" position, the product supports lighting while charging, but the charging time will be extended accordingly.
- 2. Lighting:
①At this time, touch“⊙”interaction position, it has following functions: press shortly once, the white LED light is on; press twice, the light is off; If continue to touch“⊙”position, the LED lighting according to this cycle;
②At this time, touch“⊙”interaction position, it has following functions: when LED light is on, pressing a long time on“⊙”interaction position is step-less dimmer, the brightness will reduce gradually. The brightness will stop at the corresponding lumen when loosen, there is no change when in the lowest brightness; and vice-verse.
Push the sound switch to ON, the blue indicator will lighten,it enters Bluetooth mode by default(NO U disk and TF card are inserted), at this time, plug in U disk or SD card, MP3 sound directly play the internally stored music files(First read the last inserted U disk or SD card);When the AUX is plugged into the audio cable and connected to the phone or computer, it will automatically enter the AUX mode and can be used directly for external audio. When you stop using it, please turn the switch to the "OFF" position;
- 4. Bluetooth mode: After entering the Bluetooth mode, the Bluetooth device name is: sound lamp. When connecting to Bluetooth with a mobile phone or computer, a beep will appear. When the connection is disconnected, a beep will also appear, such as forced disconnection. Bluetooth, you can press and hold the M button. When the prompt sounds, you can use the phone or computer to connect to Bluetooth.
- 5. The product button and function buttons are defined as follows:
Warning:
1.Please strictly follow the instructions.
2.Please do not replace the spare parts and modify the lamps.
3.If the outer soft line was damaged, it should be replaced by manufacturer or service agent. The light source can’t be replaced, when it uses up, please replace the whole lamp.
- 10. It is fit for elders to play music and lighten when go outside for morning exercise,dance or walking;
- 11. It is fit for street vendor in night market, can lighten and also can replace your microphone to play music;
- 1. Please charge the product for 3 hours when it is used for the first time to ensure the battery life.
- 2. In the process of use, When the LED lighting is automatically turned off or the sound quality is obviously noisy, it indicates the power is close to finish;When the speaker suddenly stops playing,the battery has been basically finished, at this time to switch off the power supply and charging in time, then you can use;
- 3. In the state of charging, lighting and outputting, the product has a slight fever and it is normal phenomenon;
- 4. The longest charging time can not surpass 24 hours;
- 5. When charging, please keep away from flammable,explosive substances and chemicals; please use the original adaptor to charge, or it will affect charge effect and cause security accident because of charging parameters don't match;
- 6. Don’t throw the lamp into fire or heat, it will affect flame and explosion;
- 7. Don’t shine eyes directly when using so as not to affect eyesight. (Child should be guided under adults);
- 8. Please keep full power when long time no use and charge the lamp every two months.
- 9. Please push the sound switch to "OFF"after using the product to the better use of this product
- 10. Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations.
- 11. This product belongs to category III products.